They Lied to US! Parts Catalogue Cost me $$$

44 thoughts on “They Lied to US! Parts Catalogue Cost me $$$”

1. Hey Ray you're right about your mouth buy some work flash lights with strong 🧲 magnets one less thing to distract you when working and no I'm not a hater your a very through mechanic but too much jubberish.

2. the blue o rings go to the fuel rail side not engine side you reversed them look at your video

3. About seven or eight years ago I had new heads put into my vehicle because it was recommended by a reputable shop when I put the heads in there was problems with the heads and they pulled the injectors in and out a few times it almost cost me a motor I had to vehicle in the shop a few times so they found that they put the o-ring in for it and it did a lot of damage I'm still cleaning up the motor from carbon buildup but you know they would never would say exactly what the problem was never would make good on the side effects from said problem hey have a good day

4. Danger Will Robinson danger Will Robinson danger danger danger have a good

5. Looks to me like mice with chewing on that harness all the coverings are gone are broken up you know you do what you got to do have a good day I'm sitting here by my chimneys with the fire going and a cup of coffee listening Ray what a great day

6. Air leak is definitely gone from injector 1 good Repair you can definitely hear the Difference on the camera @Rainman Ray's Repairs

7. Pretty easy fuel injector re seal on this 3.7L Jeep @Rainman Ray's Repairs

8. I run into situations where I've gotten the wrong part or defective part assembled it and then found out the things weren't right that's why I have a set of calipers and micrometers and I will scrutinize apart cuz when I looked at them over and something on the camera didn't look right but on my phone it was so little I couldn't tell the difference hey have a great day keep on trucking guys that's an old phrase maybe you remember Mr natural have a good day bye

9. I had the same thing happen on my injector o-ring it caused my one cylinder to overfill my exhaust manifold got red hot my car was desperately trying to compensate it ended up burning up my my first catalytic converter in the exhaust line I finally got it fixed and finally got the cylinder cleaned out because of the carboned up from all the gas that was dumping hey have a great day thank you Ray bye

10. I heard that alarm go off and I wanted to start hollering danger Will Robinson danger danger danger have a good day

11. I used to do the same thing before I took the dies or molds apart because he didn't want any debris getting in anything anywhere where you didn't want it a little bit of dirt in the wrong place when you do reassembly come really mess things up it applies for the automotive world it also applies for machine tooling have a great day thank you

12. You should’ve covered the throttlebody before blowing all the rat turds and the plastic.

13. I can just see the customers flocking to the Ray & AMD (the car care nut) repair shop newly opened in downtown Deltona, FL! Two honest and competent auto techs providing the absolute best in auto maintenance and repair. I would drive from Fort Worth, TX for my Toyota Camry and Honda CR-V care if gasoline was back to $1.85 per gallon.

14. O-ring can be same size, doesn't mean that the firmness is the same.

15. In my experience they're never the same o ring

16. Heard the first one crack when you removed it

17. I'm at 13.22 and the injectors look like they are loose in the bores so we might see them leak. Great job as always. Wish you were close by.

18. When an O-ring is green, I generally find that they are special.

19. The computer said…, I think all of us that work on autos, pro or otherwise, have been bitten by the computer bug.

20. Now we are cooking with crisco 😆

21. Gotta give jeep some credit for the accesiblity level. Not sure about their v8s but their 6 cylinders, especially their straight 6s are easy to get the more common failure parts.

22. " I love my job , I do it twice….if it's blue it's good ?" ….words to the wise .and live by….

23. When you compared the o rings side by side on the first removal I was thinking "oh crap that green one looks slightly thinner". Guess I didn't yell loud enough for you to hear me. LOL. Great video as always!

24. Did you just use a socket to remove a hose clamp? Who are you and what have you done with Ray?!?!?!

25. You remind me on one of them birds that copy the apple phone ringtones like peerfect lol But you just make whatever noise.. u n them birds would get along i think

26. I wish I was as smart & calm as you are, I have learned so much just by watching your videos, keep up the great work you are doing

27. How much would this job cost on a 1998 toyota tacoma 22r motor 4 cylinder engine

28. Thank you I have the same motor so now I know how to remove my injectors. T didn't hear you talk about a parts catalog.

29. I got to say "holy Tool Belt" Rainman it's a adjustable locking roller head pry bad with grip

30. Double wrapped for your protection and lubed for insertion.

31. Where's the assault air gun?

32. Could you clean everything with brake parts cleaner and lube everything with silicone grease?

33. Comment added…

34. I assume you get paid book time. Do you get paid for these do overs when it is not your fault or do you need to suck it up?

35. Had a liberty in the shop not to long ago. Had 270,xxx miles and they wanted new coils, iridium plugs, and injectors. Took 3 times to get the correct injectors! I will say the coils did not have spark plug wires either. Interesting how they are similar and different at the same time.

36. Hate to see a light die like that 😰

37. Is there a way to not shoot in a video with HDR? Whenever a video is uses HDR it controls my brightness and I cant do a thing about it. Makes my screen really bright (which I don't want) and it's kinda annoying.

38. the different colors was the tell /wrong parts suck

39. My 1990 Corolla is built with higher quality materials lol.

40. Whoever was redlining the car in the background if that was done to my truck lets say 1 my engine 😱😵 then the person who did it pay for damages and fired.
    I think all Mechanic shops should record what there doing like you so we can see the customer service and what they did to there car if something happens to well happen to there vehicle.

41. Repeat!

42. You have to be careful what lube you are using around O-rings. Some can quickly cause them to deteriorate/swell.

43. 22:00 I don't understand why you are fully installing everything, you haven't primed the fuel pump to check for leaks? I know this is the internet and its easy to see things people miss versus being in the situation at the time and place and all that jazz but commmmmeee on mannnnn lol

44. As for the metal clips for the injectors I almost always say they probably put them there for a reason or they wouldn't waste the money, only works 99% of the time. Sometimes they do some dumb stuff

Comments are closed.